So you finally have decided that you want to give 3D printing a go. Perhaps you are wondering whether or not you should build your own. Maybe go with this Bambu you keep hearing about. Whether you just want to focus on printing or build your own. Right now offers some of the most approachable options for 3D Printing.
If you are someone that DiY or tinker, have the desire to learn I would absolutely recommend taking a look at builds out there.
Some of the well known builds out there right now are the following
- Voron
- RatRig
- Mercury Zero G
- Endorphin
- Switchwire
Right now I am just trying to populate the website with topic related stories to get the content up and the look I want without the use of demo content. I do plan on doing a more in-depth write up open source vs proprietary avenues for 3D Printing.
As always the main thing in the end is how much you value your time, and budget to put towards this.
Overall
Right now is an exciting time for 3D printing as multicolor is becoming the new minimal standard and 150mms. That is 150mm of filament per second extruded by the hotend. 400-500 for your mid to high end systems reliably.
- If you have a desire to learn a broad skillset that will enable you for a mass variety for DIY projects. Building your own is absolutely worth the endeavor. Wire crimping, Board configuration, Raspberry Pi experience, machining, experience with hand tools.
- Do you want to be able to advance your system while breakthroughs are constantly occurring
- What do you value your time and if its extremely limited Bambu is perhaps your option
- Avoid the Anker M5C. Overpriced, overhyped, pure disappointment.
- No matter what printer you get Bambu etc, you will have to perform maintenance and understand the on going costs. Hot ends, filament, new beds, etc.